Accredited ISO 17025 calibration certificate for these 30354-0066 10 kg "U" Force Gauge force tools is be available on request (for an extra charge). Why Calibrate?
Highly engineered materials with close machining tolerances and proper heat treatment provide optimum strength and spring characteristics. Two year warranty. Ideal for stand alone force applications or as the load defining component of a much larger system.
The Model U Force Gauge is an accurate (±1% of full range) mechanical compression-measurement instrument. Its slim-line design has repeatedly proven valuable in installations where space is at a premium. The versatility of this simple instrument is demonstrated by the fact that it can be used as a hand held device, permanently mounted on a flat surface plate, or used in test fixtures.
1. Deflection beam
2. Indicator with zero at 6:00 position
3. Pressure fitting
4. Maximum pointer (optional)
5. Indicator plunger
6. Slanted anvil
Dillon U Force Gauges are available for measurement in pounds or kilograms. There are 6-pound capacities ranging from 25 x .25 to 5,000 x 50 lb. The 4 kilogram capacities range from 10 x .1 to 500 x 5 kg.
Dillon also offers high-capacity gauges with pounds capacities from 500 to 5,000 lb and a metric model with a capacity of 500 kg. High-capacity gauges all have flat-bottom design, and each includes one pressure fitting of your choice.
The Dillon Model U Force Gauge employs a deflection beam machined from aircraft quality alloy steel and heat treated to develop optimum strength and spring characteristics. A precision dial indicator is mounted at the null point of this beam.
Compression force is normally applied against a single pressure fitting mounted on the upper half of the beam. (For accurate calibration, designate the type of pressure fitting you wish to use with the U Force Gauge. They are of four types: domed, cupped, flat, or a flat nylon insert. Flat bottom gauges require only one fitting). When load is exerted, the beam moves downward causing a slanted anvil on the free end to push against the indicator plunger. The indicator reading is a direct representation of the applied load.
The zero position on the indicator dial can be factory positioned at 12 o'clock, 3 o'clock, 6 o'clock, or 9 o'clock. The standard position is the 6 o'clock position.
Model U Force Gauges can include a maximum pointer which remains at peak load until it is reset.
Shockless dial indicator
Offers added protection in applications where force is applied or released rapidly.
The dial indicator can be factory positioned at 0° (standard), 90°, 180°, 270° clockwise. Photos on this page show standard dial orientation.
Note: maximum pointer and shockless dial indicator cannot be offered on the same unit.
Flat-bottom version - Force gauge assembly, carrying case and one compression fitting of choice. When ordering, please specify the load fitting you need (prices for load fittings are not included)
|Dillon Model “U” Force Gauge:||Accuracy||Force Gauge Capacity & Dial Divisions
|+/- 1% of capacity||kgf||lbf|
|30354-0017||-||25 X 1/4|
|30354-0033||-||100 X 1|
|30354-0058||-||250 X 2-1/2|
|30482-0020||-||500 X 5|
|30482-0053||-||1,000 X 10|
|30478-0034||-||5,000 X 50|
|30354-0066||10 X 1/10||-|
|30354-0082||50 X 1/2||-|
|30354-0090||100 X 1||-|
|30482-0079||500 X 5||-|
Forcegauges.ca is your fast, easy-to-use website for quality force instruments available for almost any industries to measure the force during a push or pull test. We offer over 500 force gages and force sensors from most valuable brands, ready to be shipped from our Brampton (Toronto area) warehouse.
All prices in this website reflect net cost to you in Canadian dollars and does not include calculated shipping costs. Currently we accept credit card payments. However, you can submit your payment via cheques, wire transfers and purchase orders on approved credit.